Accessories enables next generation image display and can handle 4K resolution display on a 60Hz frame rate, thus creating an outstanding image performance.
Feel free to contact our experienced customer care team to assist you. You can call us or e-mail on:
Lights have the power to create the most beautiful experience that can leave your guests and audience wanting for more. With the trend of light shows going up, it’s only suggested that as event managers, you have the most amazing LED Moving Head lights to work with.
These light fixtures come with a motorized base with a built-in DMX receiver for controlled lighting from the beam of lights attached to an unlimited rotating head prism. With Rasha Professional, you get extra features such as a high-quality zoom from 4.5°-55° and a wireless battery backup for 6-10 hours without compromising the illumination, which may go up to 56,000 luminous output.
These fixtures come with the following projections:
Wash: These fixtures scatter the light to a large surface. You can get up to 10,000 lumens from one moving head LED and pure and mixed color spread. Rasha’s Kondor is a great piece that gives you fast, accurate, and pan & tilt motion.
Beam: Consider Cybrid spotlighting the performer on the stage. It is a more concentrated beam-like action that gives a rounded attention to the surface.
Spot: These are mostly quite small statures that create a very sharp ray that doesn’t scatter at all, even through air. These fixtures move fast movements and have Gobos to create instilling patterns on the stage. You can’t miss these for a music performance or on the DJ floor!
Hybrid: Save big by opting for a fixture like Photon Hybrid. You get all in one- beam, wash, spot with Gobos and animated disc. We also provide you a very impressive zoom of about 6°-42° and LEDs of 7 dichroic filter color wheels with CTO, CT.
In short, in the most compact assembly, you get the powerhouse of LED moving head lights. Whether organizing a concert for 10 thousand people or hosting an intimate wedding of 20 guests, with these moving head LEDs, you can create a mesmerizing impact to leave your guests in awe and love.
Apart from the great performance of these lights in all events set up, they do have more reasons to be a part of your collection.
Water Resistant
They’re constructed to be your outdoor lighting fixture that is tested in harsh weather conditions. Event managers have to bear a huge loss of property when a show gets canceled because of the pouring rain, as they often lose their gear in the rain. However, with our moving head LEDs, you can simply run the concert in thunder without any fear. Just secure your rig well!
Small and Compact
It would be hard to imagine, but these lights are just a few inches in size. They come in small sizes with motorized base. All you need is to put them up on hanger, connect with your DJ panel and via DMX receiver built-in, you’re all set to fire up the stage with the most luminous intensity!
Battery back up
Hassle of dangling wires is the too 90s! Our moving head LEDs give you up to 10 hours of performance in single charge. Once lit up, you can run your show without the worry of losing power due to technical glitch. These are clean resources as well as they consume less power than average light fixtures!
Investing in high-quality LED moving head lights is a smart decision, but getting them to last for years requires some care. Here are some simple yet effective tips to ensure your lights stay as brilliant as day one:
Keep Them Clean: Dust can easily gather on the lenses, motors, and internal parts like Gobos, rotating disc, adjusting wheels, etc, affecting the brightness and performance of your lights. Regular cleaning is essential. Use a soft cloth or microfibre wipe or air blower to clear away dust from the lenses and fans. Keeping your lights clean helps maintain their output and prevents overheating.
Watch the Heat: LED lights are efficient, but heat can still build up over time. Excessive heat can damage the LED chip and motor. Ensure your lights are well-ventilated and kept away from heat sources. Overheating can shorten the lifespan of your fixtures, so be sure they're getting proper airflow during and after use.
Store Them Right: When your lights aren’t in use, make sure they’re stored in a dry, cool place. Avoid damp environments, which can lead to rust or electrical issues. Use protective cases or covers to shield them from dust and physical damage.
Check the Wiring: Make sure all connections and wires are in top shape. Loose or damaged wiring can cause power failures or disrupt the show. Inspect the cables and DMX connectors regularly to ensure everything runs smoothly during your events. Hire an expert to build electrical connections so they secure your hardware properly.
Maintain the Battery: If you choose our moving head LEDs with a battery backup, don’t wait until it’s completely drained before recharging. Doing so can shorten its lifespan. Keep the battery charged periodically, even when not in use, to ensure it’s ready for your next event. In full charge will give you 10 hours output on average lumens and upto 6 hours on max setting.
Routine Maintenance: Like any equipment, LED moving head lights need regular check-ups. Schedule routine inspections for the motor, strobe shutters, prisms, light source, and DMX controls. It’s a good idea to have a technician check them thoroughly to prevent any future issues.
Don’t Overload: Even though these lights are energy-efficient, overloading the circuit by running too many on one power source can lead to outages or damage. Always make sure you're distributing the load evenly to avoid any problems during your event.
By following these simple tips, you can ensure your LED moving head lights deliver exceptional performance for years to come, making your investment a worthwhile one.
Getting Ready For The Next Event?
Make conscious choice of selecting which moving head LED will add glamor and life to your event. Hybrids are a great investment for events that need flexibility of going wide and really intense at once. For example, you’re organizing an stand-up show for a Comedian. There you will need a good hybrid. However, for a rock concert, consider more specialized versions. Pick your device with all considerations.
Takeaway Notes:
Types of Moving Head LEDs
Wash: Perfect for spreading light across large areas, delivering up to 10,000 lumens with rich, vibrant colors.
Beam: Ideal for spotlighting performers on stage, creating a focused, rounded light effect.
Spot: Sharp, concentrated beams that stay intact even through the air—great for creating patterns with Gobos.
Hybrid: A flexible choice like the Photon Hybrid combines beam, wash, and spot functions, offering incredible zoom and dynamic lighting effects.
Why Choose Rasha’s LED Moving Head Lights?
Water-Resistant: Designed for outdoor events, they can handle rain and harsh weather without skipping a beat.
Compact Size: Don’t let their small size fool you—these lights pack serious power with intense brightness.
Battery Backup: Enjoy up to 10 hours of light on a single charge, so you never have to worry about power issues during your event.
How to Make Sure Your Lights Last
Keep them clean
Keep them away from direct heat
Store properly
Check the wiring
Take care of the battery
Routine maintenance
Avoid overloading by connecting multiple fixtures
When selecting your moving head LED, consider the type of event you’re hosting. Hybrid lights offer versatility for different effects, while more specialized options like beam or spot lights are better for focused events like concerts or theater performances.